When a Pilsner is not enough. This alternate start to Pull me a Pilsner is
an excellent variation for those wanting to add a bit of difficulty to their
days climbing. Alternatively climb it as a single pitch route after
finishing Pull Me Pilsner. There is a double bolt belay at the end of the
12m long overhanging seam.
When standing at the base of Pull Me A Pilsner look to your right and you
will see the overhanging seam heading up to an arete. M7 12m
From the first belay continue up the crack to a stance, then continue this
crack line on the right of the arete stepping further right at the end of the
crack to top out onto the ledge and second pitch belay of Pull Me A Pilsner.
18m. M4-5 Double bolt chain belay.
- P1
- Mixed M7
- 30m
- Trad
The thin seam on the wall to the right of Pull me a Pilsner Direct Start. Pitch 1, Take double cams Green C3, red c3 single .3&.4c4 One set regular wires one set of offsets are handy up to #6. One #2 camalot for the start of the route. Pitch 2, regular set of cams up to #2 camalot.
Awesome climb. To be consistent with the other grades in the Remarkables area it should be listed as M8